EasyManua.ls Logo

Bestway SaluSpa 54130E - User Manual

Bestway SaluSpa 54130E
16 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
S-S-004676/21x28.5cm/54124E,54130E,54149E,54155E,54157E/美国规Salu SPA说明书/JS-YF-2016-B-05547/英
S-S-004676
#54124E, #54130E, #54149E,
#54155E, #54157E
110-120V~60Hz, 12A at 20ºC
Owner’s Manual
Website: www.bestwaycorp.com
Visit Bestway YouTube channel
QUESTIONS? PROBLEMS?
MISSING PARTS?
Tel: 1-855-838-3888
service@bestwaycorp.us
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
www.bestwaycorp.com
TO THE STORE

Table of Contents

Questions and Answers

  • R
    Rodney LarsonAug 9, 2025
    What to do if my Bestway SaluSpa 54130E pump does not heat properly?
    • J
      Joshua MeyerAug 9, 2025
      If your Bestway Hot Tub pump isn't heating properly, there could be several reasons. First, check if the temperature is set too low and increase it. Second, the filter cartridge might be dirty, so clean or replace it. Third, the thermal cut-out may have activated; unplug the pump, let it cool to 35°C (95°F) or lower, and then restart it. Also, make sure the spa is covered to retain heat. If none of these steps work, it may indicate a heating element failure or fuse cutout.
  • E
    Emily JonesAug 15, 2025
    Why Bestway Hot Tub pump does not operate?
    • L
      Luis PowellAug 15, 2025
      If your Bestway Hot Tub pump isn't working, the issue might be a power failure. Check your power source to ensure it's functioning correctly. If the GFCI is broken, contact your local Bestway After Sales service point to get instructions.
  • Y
    ythompsonAug 20, 2025
    What to do if massage system does not work on Bestway SaluSpa 54130E Hot Tub?
    • D
      Daniel StevensonAug 20, 2025
      If the massage system on your Bestway Hot Tub isn't working, the air pump might be overheating. Unplug the pump and wait two hours for it to cool down. Then, plug it back in and press the massage system button to reactivate it. Also, the massage system might have stopped automatically. In this case, press the massage system button to reactivate it. If the air pump is broken, contact your local Bestway Aftersales Service Center for instructions.
  • K
    klinedavidAug 27, 2025
    What to do if my Bestway SaluSpa 54130E has a spa pool leakage?
    • N
      Nichole BerryAug 27, 2025
      If your Bestway Hot Tub is leaking, check for tears or punctures in the spa and use the provided repair patch to fix them. Also, the air valve might be loose. To check, cover the air valve with soapy water to see if air is escaping. If it is, deflate the spa, hold the backside of the air valve from inside the spa wall, and turn the wrench clockwise to tighten it.
  • G
    gregory93Sep 1, 2025
    How to level pump adapters on Bestway SaluSpa 54130E?
    • M
      Melissa BrownSep 1, 2025
      Due to PVC characteristics, the pump adapters on your Bestway Hot Tub might not be level with the spa adapters. To fix this, elevate the pump using wood or another insulated material to align the pump's adapters with the spa's adapters.

Summary

General Safety Information

Important Safety Instructions

Essential safety precautions for electrical equipment use.

Risk Mitigation Warnings

Warnings to reduce risks of electrocution, child drowning, and overheating.

Installation Guide

Selected Location

Proper site selection criteria for installing the SaluSpa.

GFCI Test Procedure

Step-by-step guide for testing the GFCI plug before use.

Air Valve Check

Troubleshooting Guide

Common Problems and Solutions

Lists common issues and their probable causes and solutions.

Bestway SaluSpa 54130E Specifications

General IconGeneral
BrandBestway
ModelSaluSpa 54130E
TypeInflatable Hot Tub
Water Capacity210 gallons
Heating SystemRapid Heating System
Maximum Temperature104°F
Included PumpYes
Digital Control PanelYes
Power Supply110-120V
Chemicals DispenserYes
Temperature Range68°F to 104°F
CoverInsulated cover
Filter CartridgeType VI
Air Jets120

Related product manuals