Beta Three DT Series - 3 Installation Drawing P3

3
88mm 76mm
4
33
mm
3
8
0m
m
4
0
5
m
m
4
6
4
.
5mm
48
2m
m
88mm 76mm
4
3
3m
m
38
0m
m
40
5
mm
4
64.
5m
m
4
82m
m
3. INSTALLATION DRAWING
Two Channels
Four Channels
This product is the standardized 2U height, and it can be installed in an EIA 19-inch standardized
rack. The front panel and the rear panel of this product provide 8 mounting points for rack installation.
Please attach washers to the screws when installing fixed screws.
Both the front and the rear panels need to be fastened during the handling process. If the rear plate
is not fixed during the handling process, damages are not within the scope of warranty.
Please maintain proper ventilation, air vents should not be covered with articles that disrupt
ventilation, such as newspapers, tablecloths, and curtains. For rack installations, please keep
a gap of at least 10cm away from both the front and the rear air vents.