Why no LEDs turn on, but all LEDs turn on when charger is plugged in Beta Remote Starter?
If you observe that no LEDs turn on, but all LEDs illuminate when the charger is plugged into your Beta Remote Starter, it may indicate a defective battery. This could also be due to the starter being subjected to excessively intensive use without adequate cooling. Please also refer to the operating instructions.
What to do if Beta 1498/12 battery booster is fully charged but has no power?
If your Beta Remote Starter's battery booster is fully charged but has no power, check the cable connections to the jaws on the booster's clamps. Ensure they are properly connected to the battery terminal.
Why is Beta Remote Starter not charging even though the charger works?
If the charger works but your Beta Remote Starter's battery booster isn't charging, the battery may be defective, or the breaker may be faulty. Try using a device with a cigar lighter plug (like a 12V light) to see if it works. If it works, the breaker is OK, and the battery is likely the problem.
What to do if Beta 1498/12 Remote Starter clicks when connecting 12V accessory?
If you hear a clicking sound when connecting a 12V accessory to your Beta Remote Starter's battery booster, the accessory plug may be defective, causing the automatic breaker to go off.
How to troubleshoot Beta 1498/12 Remote Starter LEDs if only one or two light up after charging?
If only one or two LEDs light up on your Beta Remote Starter after charging for 24 hours, first check if the charger is working by feeling if it's warm. Then, inspect the fuse inside the charger's cigar lighter plug to ensure it's not defective.
What to do if no LEDs come on Beta Remote Starter unless charger is plugged in?
If no LEDs light up on your Beta Remote Starter unless the charger is plugged in, the battery is likely defective due to intense use without a cool-down period. Refer to the operating instructions for proper usage.
General| Brand | Beta |
|---|---|
| Model | 1498/12 |
| Category | Remote Starter |
| Language | English |
Defines the intended use and prohibited operations for the portable car starter.
Ensures safe operation by avoiding hazardous environments and distractions.
Provides critical instructions for safe battery connection and polarity management.
Covers pre-use checks, damage avoidance, and safe charging practices for the starter.
Highlights operator alertness, essential PPE, and safe operating room conditions.
Details mandatory protective gear required for operating the portable starter.
Presents key technical data for different models of the portable starter.
Explains how to interpret the LED indicators for the starter's charge status.
Step-by-step instructions for charging both 12V and 12V-24V portable starter models.
Comprehensive guide on connecting and using the starter to jump-start vehicles.
Instructions for replacing the fuse located in the cigarette lighter plug.
Identifies common problems and provides solutions for the portable starter.
Answers common queries regarding starter performance, maintenance, and charging.
Guidelines for professional maintenance and repair services for the equipment.
Information on the proper and environmentally responsible disposal of the product.
Details the warranty period, coverage, and conditions for the portable starter.
Confirms the product's compliance with relevant European Union directives.
To Next Page