Beta 1498/12 - Operational Safety; Starter Integrity and Charging Safety; Personnel Safety and Protective Gear

9
ISTRUZIONI PER L’USO
I
INSTRUCTIONS FOR USE
EN
PORTABLE STARTER SAFETY
• Before use, check that the starter has not been damaged, and that there are no uncovered cables
or worn parts.
• Do not use the device when damaged, to avoid the risk of electric shocks; do not try to open or modify it.
• To maintain the internal battery in full working order, charge the starter after each use, or every three
months, if not used for a long period of time.
• Do not damage the electronic circuit of the starter.
• Connect the charger of the starter to the mains power supply, making sure that the mains voltage
matches that stated on the power supply device. (See TECHNICAL DATA table)
• When charge is complete, do not leave the device connected to the battery charger for a long period.
• Do not use the device in humid or wet environments; do not expose it to rain. Wet and contaminated
environments increase the risk of electric shocks.
PERSONNEL SAFETY
• Stay alert; watch what you are doing. Do not use the device while tired or under the inuence of drugs,
alcohol, or medications
• Always use the following personal protective equipment:
• safety shoes
• eye protection
• protective gloves against physical agents.
• Use the starter in well-aired, dry rooms.
• Never allow the clips of the clamps (positive-red and negative-red) to touch together.
• Check that the cables of the starter are kept away from fans, moving parts and the fuel pipe.
• Do not wear loose clothing, jewellery or metal objects when working on the vehicle.
• Before replacing the starter, make sure that it has cooled down and reached room temperature.