Need help?Do you have a question about the Beta Enduro RR 300 2T 2016 and is the answer not in the manual?
General| Engine Type | Single-cylinder, 2-stroke |
|---|---|
| Displacement | 293.1 cc |
| Bore x Stroke | 72 mm x 72 mm |
| Lubrication | Premix |
| Cooling System | Liquid-cooled |
| Transmission | 6-speed |
| Clutch | Wet multi-disc |
| Starting System | Kick starter |
| Fuel System | Keihin PWK 36 mm carburetor |
Procedures for checking connecting rod and motor shaft alignment and play.
Steps for assembling the complete crankshaft into the crankcase.
Procedures for checking and reassembling the gear unit and gearshift.
Checks for forks, fork pins, and the desmodromic shifting device.
Steps for properly closing the engine crankcase halves.
Procedures for checking the kick starter device.
Procedures for checking the main gear and clutch unit components.
Checks for the clutch case, roller bearing, and internal centre bearing.
Procedures for checking clutch disc thickness and condition.
Steps for assembling the complete clutch unit.
Procedures for checking the coolant liquid pump and centrifugal unit.
Procedures for checking the electric ignition unit.
Procedures for checking the ignition system.
Procedures for checking the thermal unit components.
Procedures for checking the cylinder for wear and damage.
To Next Page
