BETAFPV LiteRadio 2 SE User Manual

04
● The LED ring breathes in red means charging, while in green means fully charged.
● Turn o the radio transmitter.
● Plug in remote control radio transmitter with adapter by USB cable (5V output
adapter is allowed).
Remote control radio transmitter has a built-in 1000mAh batte. It indicates low
batte and needs to be re-charged if blue light ashes slowly. Below charging
method for reference:
The continue working time for full charged batte is about 8 hours.
6.Charging
Type-C Data Cable
3. Then the ash times of the red LED before buzzer alarms will change, according
to the tables above.󲞚
Note: LiteRadio 2 SE only work with D16 ACCST 1.X Frsky protocol. So if you use a Frsky receiver
with D16 ACCST 2.X version or ACCESS version, binding will fail.

BETAFPV LiteRadio 2 SE Specifications

General

Brand	BETAFPV
Model	LiteRadio 2 SE
Category	Controller
Language	English