BETAFPV LiteRadio 3 Pro - Back View Layout; 2. LED Status and Sound Mode; LED Status Indicators Explained

● Power Button: Long press to turn on/o.
● Bootloader Button: Turn o the radio transmitter. Press the Bootloader button and
Power button, release at the same time, switch on to enter the Bootloader inteace.
● Toggle Switch: Toggle to activate the ne-tuning function of the remote control
joystick.
● Left 5-D Button: Toggle the button up/down/left/right to ne-tune the joystick.
Press the button to exit/return to the page.
● Right 5-D Button:Toggle the button up/down/left/right to select and move. Press
the button to conrm/enter.
2. LED Status and Sound Mode
● The status of the LED light descripted with the remote control status.
Back view:
Status Description Operation Description
Green light solid on Booting
Press and hold the power
button till turn on
Red light solid on
Blue light solid on
Red light solid on when
turning o
Red light o when
turning o
Throttle joystick or switches
is not on the lowest
Working
On charging
Charge complete
Press any key to skip or both
the joystick and the key are hit
to the lowest position
LED Status
02
Toggle Switch
Audio Po
Bootloader
Type-C Po
NANO Bay