Need help?Do you have a question about the BETAFPV LiteRadio 3 Pro and is the answer not in the manual?
General| Item | BETAFPV LiteRadio 3 Pro |
|---|---|
| Frequency | 2.4GHz |
| Channels | 16 |
| Charging | USB-C |
| Charging Connector | USB-C |
| Firmware Upgrade Method | USB |
| Support Simulator | Yes |
| Display | OLED |
| Gimbals | Hall Sensor Gimbals |
| Operating Voltage | 3.7V |
| Firmware | OpenTX |
| Protocol Option | ELRS |
| Power Output Bayang | 25mW |
| RF Power | 100mW |
| Compatibility | ELRS |
Diagram showing top controls like switches and joysticks.
Diagram showing front controls, screen, buttons, and joysticks.
Diagram showing back ports, module bay, and switches.
Details LED states for booting, working, charging, and low battery.
Explains boot-time warnings and the main operating interface.
Guide to entering, switching, and exiting the remote's setting menus.
Steps to set up the internal ELRS transmitter module.
Steps to configure an external transmitter module with ELRS.
Steps to set up the internal CC2500 transmitter module.
Steps to configure an external transmitter module with CC2500.
Instructions on how to access the gimbal calibration menu.
Detailed steps and notes for accurate gimbal calibration.
Describes the visual and audio cues for low battery status.
Explains how to charge the transmitter and interpret charging indicators.
Guide to connect the transmitter to a PC as a USB joystick.
Links to support website, firmware configurators, and guides.
To Next Page
