5. Low Batte Ale and Charging
LiteRadio 3 Pro radio transmitter has a built-in 2000mAh batte, therefore, there is
no need for an external batte. The normal voltage of batte is 4.2V-3.4V. The
screen will display the batte voltage in real-time.
When the batte voltage is less than 3.4V, the radio transmitter's low-voltage alarm
will be triggered: the batte icon on the screen ashes with the buzzer vibration
and the speaker emits a "dididi" sound. Please turn it o in time to recharge it.
Charging procedures are as below for reference:
● Turn o the radio transmitter;
● Plug the USB cable with adapter into the remote control radio transmitter (5V
output adapter is allowed);
● LED ring displaying red indicates that the remote is charging. The LED ring
turning o means the remote is fully charged.
The continuous working time for a fully charged batte is about 15 hours (100mW
transmit power);
Turning o a fully charged radio, the batte capacity can be kept at about 80% for
30 days.
09
Output 5V
Type-C Data Cable
MODEL01
3.4V
To Next Page
Loading...