Need help?Do you have a question about the Better Rest SoClean 2 CPAP and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Product Type | CPAP Cleaner |
| Manufacturer | Better Rest Solutions |
| Cleaning Method | Ozone Cleaning |
| Power Source | AC Adapter |
| Warranty | 2 years |
| Product Name | SoClean 2 |
| Device Type | CPAP |
| Technology | Ozone |
| Compatibility | Most CPAP machines |
Lists DANGER and WARNING statements for safe operation and handling of the SoClean unit.
Details the physical dimensions, weight, electrical requirements, power consumption, and warranty.
The power adapter required to operate the SoClean unit.
The filter that converts activated oxygen back into normal oxygen.
Assembly preventing water backup into the SoClean from the humidifier.
A plug used to seal the hose slot when not in use.
A cleaning solution for hand-washing CPAP equipment.
Prevents humidifier water backing up into the SoClean; replace every 6 months.
Converts activated oxygen to normal oxygen; replace every 6 months.
Hypoallergenic cleaner for pre-existing odors and residues on CPAP equipment.
Instructions for washing CPAP components with pre-wash solution and clean water.
Connects CPAP hose to humidifier reservoir for SoClean operation.
Connects the main CPAP hose to the injection fitting after setup.
Adapts the fitting for direct connection to the CPAP machine when no humidifier is used.
Connects the AC adapter to the unit and a wall outlet to begin operation.
Explains the function of each button and display element on the SoClean control panel.
Describes how the timer automates cleaning cycles and the initial setup for the clock.
Step-by-step guide to setting the current time on the SoClean display.
Adjusts the sanitizing cycle length, recommending 5-10 minutes.
Specifies the desired time for the automatic sanitizing cycle to begin.
Initiates a sanitizing cycle on demand without using the programmed timer.
Option to switch the time display between 12-hour and 24-hour (military) formats.
Explains the meaning of red, yellow, and green indicator lights during operation.
Deciphers messages like 'Hose not present' or 'Order Filter Kit' for troubleshooting.
The first step in placing CPAP equipment inside the SoClean unit.
How to properly position CPAP mask and hose, including hose slot usage.
Securing the lid to initiate the automatic sanitizing cycle.
Key conditions for operation, like mask presence and lid closure, and post-cycle waiting period.
Instructions for wiping down the unit with a damp cloth to remove dust.
Recommends replacing the check valve assembly and filter cartridge every 6 months.
Clarifies that the SoClean uses no fluids and equipment remains dry.
Addresses safety concerns regarding activated oxygen generation.
How to know the sanitizing process is complete via indicator light and scent.
Provides steps to reduce or manage residual scent after sanitizing.
Explains that these lights mean the sanitizing process is ongoing.
Identifies reasons why the indicator light might not activate after a scheduled time.
Suggests using the Manual feature if a scheduled sanitizing time is missed.
Explains the reminder for replacing the filter and check valve assembly.
Lists materials like nylon and natural rubber that degrade with activated oxygen.
Clarifies that SoClean supplements, not replaces, manufacturer cleaning recommendations.
To Next Page