BC01
Instruction Book Of BC01 cable to cable
11
7. Instructions of Operation
7.1. Please switch off the system power and ensure the male and female connector are of the same
type before using；
7.2. When mating connectors, align mate-locker on the male connector with grooves on the
female connector, and insert gradually .Connected in place, there will be a sound of "click";
7.3. If the connectors are separated, choose a corresponding flat screwdriver to push mate-locker
step slightly out of position, and then give a force along the axial direction until separation.
Click
mate-locker
To Next Page
Loading...