36
37
•
Remove any residual hair from the device after each use. Use
the cleaning brush provided for this task.
•
Do not use any aggressive, caustic, abrasive or corrosive clean-
ing products or hard brushes.
Cleaning the shaver heads under running water
Clean the device regularly, at the latest once the maintenance
indicator symbol (see chapter 6 on device description) lights up
in the display.
To clean the shaver heads very thoroughly, you can also rinse
them under running water. How to do this:
1. Pull the shaver unit upwards to
remove it from the device.
2. Push the shaver unit release
button.
The shaver heads open.
3.
Hold the shaver heads under
running water so that the jet of
water runs through the shaver
heads from the inside out.
4.
When the shaver unit is com-
pletely dry, reassemble it, fol-
lowing the above instructions in
reverse order.
10. Accessories and replacement parts
Accessories and replacement parts are available from the corre-
sponding service address (according to the service address list).
Please state the corresponding order number.
To Next Page
Loading...
Need help?
General
