Beurer BC 57 User Manual

27
Step 4: BC 57:
Data transfer immediately
after measurements.
• If Bluetooth
®
data transfer
has been activated,
data is transferred after
having confirmed the user
memory and pressing the
START/STOP button .
Step 4: BC 57:
Data transfer at a
later point:
• Go to memory
mode (chapter
10). Select the
desired user
memory. The
Bluetooth
®
transfer starts
automatically.
The ‘beurer HealthCoach’ app must be active
to allow data transfer.
If your smartphone has a protective cover, remove
this to ensure that there is no interference during
the transfer.
We would explicitly draw attention to the fact that
the software to hand is not a medical product in
accordance with EU Directive 93/42/EEC.
The values displayed are purely for visualisation
purposes and must not be used as a basis for
therapeutic treatments. The software is not part of
a diagnostic-medical system.
11. Care and Maintenance
•I t is recommended to disinfect the cuff 2 times
every week if needed. Wipe the inner side (the
side touching the skin) of the cuff with a soft
cloth, squeezed after moistened with Ethyl alco-
hol (75-90%), then dry the cuff by airing.
• C leaning of the cuff after the usage of every 200
times is recommended.
• C lean the device and cuff with a slightly moist-
ened cloth.
•D o not use detergents or solvents.
• N ever immerse the device in water or other
liquids.
•W hen storing the device, make sure no heavy
objects are placed on top of it.

Beurer BC 57 Specifications

General

Measurement Method	Oscillometric
Display Type	LCD
Memory Capacity	60 measurements
Cuff Size	13.5 - 21.5 cm
Type	Upper arm blood pressure monitor
Arrhythmia detection	Yes
Risk indicator	Yes
Number of memory spaces	60
Measurement Range (Pressure)	0 - 299 mmHg
Automatic Shut-off	Yes
Irregular Heartbeat Detection	Yes
WHO Classification Indicator	Yes
Measurement Range (Pulse)	40 - 199 bpm