24
Battery life For approx. 500 measurements,
depending on the blood pressure
level and/or pump pressure
Accessories Instruction for use, 4 x 1.5 V AA
batteries, storage pouch
Classification Internal supply, IPX0, no AP or
APG, continuous operation, type
BF applied part
Key to symbols
WARNING! Read the safety
information and all instruc-
tions to avoid serious injury.
application part Type BF
Auto-shut-off approx. 1 minute after last button
operation
These specifications are subject to change without notice
for purpose of improvement.
•
This unit is in line with European Standard EN60601-1-2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may
interfere with this instrument. For more details, please
contact customer service at the address indicated.
•
The instrument is in line with the EU Medical Products
Directive 93/42/EC, the German medical
products act
and European standards EN1060-1
(non-invasive Blood
Pressure Monitors, Part 1: general requirements) and
EN1060-3 (non-invasive Blood Pressure Monitors, Part 3:
Supplementary Requirements for Electromechanical
Blood Pressure Measurement Systems).
11. FCC Statement
Changes or modifications to the product not expressly ap-
proved by the manufacturer could void the user’s authority
to operate the equipment.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference in a resi
-
dential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or more
of the following measures:
–
Reorient or relocate the receiving antenna.
To Next Page
Loading...
