23
The ‘beurer HealthCoach’ app must be active to allow
data transfer.
If your smartphone has a protective cover, remove
this to ensure that there is no interference during the
transfer.
We would explicitly draw attention to the fact that
the software to hand is not a medical product in
accordance with EU Directive 93/42/EEC. The values
displayed are purely for visualisation purposes and
must not be used as a basis for therapeutic treatments.
The software is not part of a diagnostic-medical
system.
10. Care and Maintenance
•
C
lean the device and cuff with a slightly moistened
cloth.
•
D
o not use detergents or solvents.
•
N
ever immerse the device in water or other liquids.
•
W
hen storing the device, make sure no heavy
objects are placed on top of it. Remove the batteries.
Ensure the Air Tube does not have any sharp kinks.
11. Troubleshooting Guide
In the event of errors, the error message appears
on the screen.
Error messages may appear if:
•
I
t was not possible to correctly record the pulse: ;
•
Y
ou speak or move during the measurement: ;
•
T
he cuff is fastened too tightly or loosely: ;
•
E
rrors occur during the measurement:
;
•
T
he pump pressure is higher than 300 mmHg:
;
•
T
he batteries are almost empty:
;
•
T
he data could not be sent via Bluetooth
®
:
.
In such cases, repeat the measurement. Do not move
or speak. If necessary, replace the batteries.
12. Technical Specifications
Model BM 76
Type MD3600
Measurement
Method
Oscillometric, non-invasive
blood pressure measurement
on the upper arm
To Next Page
Loading...
