Beurer FS 60 - Intended Use; Important instructions during use; Important instructions for after use; Device Description

7
3. INTENDED USE
3.1 Important instructions during use
Warning
• Switch o the device immediately if a fault occurs during use and unplug it from the
socket.
• Do not keep your face too close to the mask as otherwise burns can occur because of
the hot steam. Close your eyes during use and protect heat-sensitive areas.
• Do not use the device for longer than 20 minutes.
• Stop using it with oils and herbs if skin irritation or anything else unusual occurs in the
skin.
• You should also stop using it if you develop pain or feel unwell and you should consult
your doctor.
• Do not use the device under covers, towels etc.
• Do not change the accessories while in use as there is a risk of burns if hot liquids spill.
• Caution: The overheating protection switches the device o after approx. 2 minute if the
water in the water container has run dry.
• The device can be started again as normal after a cooling down period of approx. 6 minu-
tes.
• If the device falls into water by accident, unplug it immediately. Have the device checked
by a qualified electrician before using it again.
3.2 Important instructions for after use
Important
• After use, switch o the device and unplug it.
• Never unplug it with wet hands or by pulling on the cable.
• Empty any remaining liquid from the side of the vaporizer. Ensure that no liquids can get
into the device through the switch, the cable or the bottom of the device.
• The device should be cleaned after use to avoid the collection of grease and other resi-
dues. This ensures optimal operation and prolongs the working life of the device.
• Let the device cool down fully before operating it again.
• If you have any further questions about using our devices, please consult your dealer or
the Customer Service department.
4. DEVICE DESCRIPTION
1
Facial sauna steam mask for the entire
face
7
Aroma attachment
2
Water container
8
Facial sauna steam mask for nose and
mouth
3
Basic unit
9
Steam valve (reverse)
4
Maximum filling level
10
Steam disc
5
Rotary switch
11
Measuring cup
6
Indicator light
12
Output levels