Beurer GL50 - Lancing Device and Lancet Needles; USB Cover; Display Symbols

12 Beurer GL50 mmol/L
3.2 Lancing device and lancet needles
1 AST cap (transparent)
2 Cap
3 Protective lancet disc
4 Sterile lancet needles
5 Lancet holder
6 Dial for setting
dierent penetration depths
7 Tensioning slider
8 Trigger
3.3 USB cover
If you would like to use the blood glucose monitor without
the integrated lancing device, you can use the supplied
USB cover in place of the lancing device.
3.4 Display symbols
1 Speaker symbol
2 Temperature symbol
3 Replace battery symbol
4 Time
5 Date
6 Measured value display, HI, LO display,
average blood glucose value, ERR, USB
7 Symbols for labelling measurements
8 Memory symbol
9 Test strip and blood droplet symbol
10 Blood glucose unit mg/dL –
not functional
11 Blood glucose unit mmol/L
Note
To read the measured values correctly, the underline must be below the measured values.
Note
The blood glucose monitor is supplied with the following basic settings:
• Blood glucose unit: mmol/L
• Acoustic signal on
• Backlighting on