What to do if the Beurer HA 20 tone is very weak?
If the tone from your Beurer Hearing Aid is weak and faint, consider these possibilities: * The volume setting on the hearing aid may be too low; adjust it to a higher level. * The battery could be almost flat, try replacing it. * The earplug might be dirty; try cleaning it. * The microphone might be dirty; try cleaning it.
Why is my Beurer HA 20 Hearing Aid so quiet?
If your Beurer Hearing Aid is too quiet, try these steps: First, increase the volume setting. If that doesn't work, replace the battery, as it may be running low. Additionally, clean the earplug and the microphone to ensure they are free of any blockage.
Why can't I hear any sound from my Beurer HA 20 Hearing Aid?
If you cannot hear any sounds from your Beurer Hearing Aid, several factors could be responsible. First, verify that the hearing aid is switched on. Next, ensure the battery is correctly inserted, paying attention to the polarity. If the issue persists, the battery may be flat and need replacement. A dirty microphone can also cause this problem, so try cleaning it. In the unlikely event that none of these steps work, the hearing aid might be damaged and require replacement or repair.
What to do if the sound from my Beurer HA 20 Hearing Aid is very weak?
If the tone from your Beurer Hearing Aid is weak or faint, it could be due to several reasons. Initially, check the volume setting and increase it if it's too low. Also, a nearly flat battery can cause this issue, so try replacing the battery. Ensure that the battery compartment is securely closed. A dirty earplug or microphone might also be the cause; clean them to see if that improves the sound. Finally, the earplug itself may be damaged and need replacement.
Why no sound from my Beurer HA 20 Hearing Aid?
If you can't hear any sounds from your Beurer Hearing Aid, here are a few things to check: * Make sure the hearing aid is switched on. * Verify the battery is correctly inserted, paying attention to the polarity. * The battery may be flat, so try replacing it. * The microphone might be dirty; try cleaning it. * In rare cases, the hearing aid might be damaged.
What to do if no sound from Beurer HA 20?
If no sounds are coming from your Beurer Hearing Aid, first ensure that the device is switched on. Then, check if the batteries are correctly inserted and replace them if they are empty. Also, make sure the microphone is clean. If the problem persists, the hearing aid might be damaged and require repair or replacement.
How to stop loud feedback sound from Beurer Hearing Aid?
If you're experiencing excessively loud feedback from your Beurer Hearing Aid, switch it off and re-insert it into your ear, making sure it's correctly positioned. Also, ensure that the earpiece fits properly. If the earpiece does not fit correctly, try another attachment. It is recommended to use an earplug that fits correctly. If you have any doubts, please contact Customer Services.
Why my Beurer Amplifier doesn't produce any sound?
If your Beurer Amplifier isn't producing sound, several factors could be at play. First, ensure the amplifier is switched on. Next, verify the battery is correctly inserted, paying attention to the polarity. A flat battery is a common culprit, so try replacing it. Check the microphone for any dirt or obstructions and clean it if necessary. If none of these steps work, it is possible that the hearing amplifier is damaged.
How to fix a weak tone on my Beurer Amplifier?
A weak or faint tone on your Beurer Amplifier can often be resolved with a few simple checks. Start by increasing the volume setting on the amplifier. If that doesn't help, the battery might be low; try replacing it. Also, inspect the earplug and microphone for dirt, cleaning them if needed. In some cases, the earphone itself may be damaged and require replacement.
What to do if the earpiece of Beurer Amplifier doesn't fit?
If the earpiece of your Beurer Amplifier doesn't fit correctly, switch off the hearing amplifier and carefully re-insert it into your ear, making sure it's properly positioned. If the earpiece still doesn't fit well, try using a different attachment to find a more comfortable and secure fit.
General| Max. output level: | 128 dB ± 4 dB |
|---|---|
| Sound pressure level: | 129.4 dB in accordance with IEC 60118-7 |
| Sound amplification: | 40 dB ± 5 dB |
| Overall harmonic distortion: | ≤ 5% |
| Frequency range: | 200 ~ 5000 Hz |
| Input noise: | ≤ 30 dB |
| Voltage: | 1.4 V |
| Power supply: | ≤ 4 mA |
| Operating conditions: | Temperature: -10°C ~ +40°C Relative humidity: 30% ~ 75% Atmospheric pressure: 700 ~ 1600 hPa |
| Storage and transportation conditions | Temperature: -10°C ~ +55°C Relative humidity: 10% ~ 90% Atmospheric pressure: 500 ~ 1600 hPa |
To Next Page
