How to adjust the volume if the Beurer HA 85 Pair sound is too loud?
If the sound from your Beurer Hearing Aid is too loud, try the following: lower the volume. Also, consider switching the device to the other ear, although using the device in the specified ear is recommended whenever possible. Make sure the microphone is not obscured by your ear or hair.
What to do if the Beurer Hearing Aid sound is too weak?
If the sound from your Beurer Hearing Aid is very weak, here's what you can do: First, check the volume setting and increase it if it's too low. The battery might also be weak, so try replacing it. Additionally, a dirty earplug or microphone can cause this issue, so clean them. If the problem persists, the earpiece might be damaged and require repair or replacement.
Why is there no sound coming from my Beurer Hearing Aid?
If you're not getting any sound from your Beurer Hearing Aid, there might be a few reasons. First, ensure that the hearing aid is switched on. If it is on, check if the battery is charged. A clogged or dirty microphone can also cause this issue, so try cleaning it. If none of these steps work, the hearing aid might be damaged and require repair or replacement.
Provides critical warnings to prevent fire, electric shock, serious injury, and misuse of the device.
Details safety measures for handling, installing, and disposing of batteries to prevent damage or injury.
Provides step-by-step instructions on how to wear and position the hearing amplifiers correctly.
Details how to increase or decrease the sound volume using the plus and minus buttons.
General| Brand | Beurer |
|---|---|
| Model | HA 85 Pair |
| Category | Hearing Aid |
| Language | English |
To Next Page
