Beurer HT 22 - Device Description; Using the Device

15
21
PAP
Dispose of packaging in an environmentally friend-
ly manner.
Read the instructions for use.
CE labelling
This product satisfies the requirements of the ap
-
plicable European and national directives.
Direct current
The device is suitable for use with direct current
only.
The products demonstrably meet the require-
ments of the Technical Regulations of the EAEU.
Disposal in accordance with the Waste Electrical
and Electronic Equipment EC Directive – WEEE.
United Kingdom Conformity Assessed Mark
3. DEVICE DESCRIPTION
The corresponding drawings are shown on page 3.
1
Display
4
Cutting chamber
2
ON/OFF button
5
Collection tray
3
Plate locking system
6
Charging socket
4. USING THE DEVICE
Charging the battery
The device should only be charged with a mains adapt-
er with an output of 1 A.
Before using the device for the first time, you must charge it
for a minimum of 2 hours.