EasyManua.ls Logo

Beurer HT 75 - After Use; Cleaning and Maintenance; Disposal; Technical Specifications

Beurer HT 75
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
5� To wind the hair sections inwards or outwards, press and hold the anti-clockwise rotation button
5
or
clockwise rotation button
6
until the hair section is completely wound up (see drawing
B
C
on fold-out
page)� After 12 seconds, an acoustic signal sounds and the curl is now ready� After the acoustic signal,
pull the curling tongs downwards and o�
6� Repeat the process with another section of hair�
After use
1�
Switch o the curling tongs after each use or interruption� To switch o the curling tongs, press and hold
the ON/OFF button
10
for two seconds� The temperature display
8
goes out�
2� Pull the mains plug out of the socket�
3�
Place the curling tongs on a stable, horizontal and non-flammable surface to cool down� Make sure that
the heating rod
4
does not touch the surface�
4� Wait until the heating rod
4
has cooled down completely� Then store the curling tongs in a dry place
out of the reach of children�
6. CLEANING AND MAINTENANCE
WARNING
•
Risk of electric shock! Always unplug the mains plug from the socket
before cleaning� Make sure that no water gets inside the device!
•
Risk of fire! Never clean the curling tongs with highly flammable liquids!
If the curling tongs are dirty, clean them with a slightly damp cloth� If they are very dirty, you can also
moisten the cloth with a mild soapy solution� Do not use the curling tongs until they are completely dry�
7. DISPOSAL
For environmental reasons, do not dispose of the device in household waste at the end of its service life�
Dispose of the device at a suitable local collection or recycling point in your country� Observe the local
regulations for material disposal� Dispose of the device in accordance with EC Directive Waste
Electrical and Electronic Equipment (WEEE)� If you have any questions, please contact the local
authorities responsible for waste disposal� You can obtain the location of collection points for old
devices from the local or municipal authorities, local waste disposal companies or your retailer, for
example�
8. TECHNICAL SPECIFICATIONS
Weight: Approx� 420 g
Voltage supply: 100-240 V ~ 50/60 Hz
Power consumption: 45 W
Protection class: II
Ambient conditions: Only approved for indoor use
Permissible temperature range: -10°C to +40°C
Subject to technical changes�
The CE mark has been applied in accordance with the following European directives:
EMC 2014/30/EU
LVD 2014/35/EU
The Declaration of Conformity for this product can be found at the following address:
https://www.beurer.com/web/we-landingpages/de/cedeclarationofconformity.php