Beurer MP 42 - Care, Maintenance, and Disposal; Replacement Parts Information; Technical Specifications

8
6. Care, Maintenance and Disposal
T urn the unit off and unplug the power cord from the electrical outlet before
cleaning the device. Clean the device with a slightly moistened cloth. You can
also moisten the cloth with a mild detergent to remove stubborn stains. Keep
water out of the device. If water does contact the device, let it dry thoroughly
before using. Clean the attachments with a cloth or brush moistened with alcohol;
dry them carefully afterwards. Do not use harsh chemicals or abrasive cleaners
on the device.
D isposal
O bserve the local regulations for material disposal. Dispose of the device in
accordance with local regulations.
I f you have any questions, please contact the local authorities responsible for
waste disposal.
7. Replacement Parts
A complete replacement set (UPC 853879007577) is available on
www.amazon.com. The following parts are included:
Flame milling cutter
Cylindrical milling cutter
Felt cone
Sapphire cone
Sapphire callus rasp
Coarse Sapphire Disc
Fine Sapphire Disc
8. Technical Specifications
Supply Input: 100 - 240 V AC 50/60 Hz 0.35 A
Output: 30 V DC 250 mA 7.5 W
Weight approx. 0.22 lb (100 g)
Dimension 5.98 x 1.46 x 1.46 in (152 x 37 x 37 mm)
Speed 2,500 +/- 20 % - 4,600 rpm +/- 15%