EasyManua.ls Logo

Beurer MP 44 - Warnings and Safety Notes; Heat Management and Diabetics; Intended Use and Operational Hazards; Preventing Skin Burns and Overheating

Beurer MP 44
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
CE labelling
This product satisfies the requirements of the applicable
European and national directives.
The products demonstrably meet the requirements of the
Technical Regulations of the EAEU.
Polarity
Energy efficiency class 6
Switching mains part
Short-circuit-proof safety isolating transformer
Direct current
The device is suitable for use with direct current only
3. Warnings and safety notes
IMPORTANT
When in use, there may be an intense heat build-up on the skin or nail.
Check results regularly during treatment. This is particularly advisable
in the case of diabetics, as they are less sensitive to pain and are liable
to become injured more easily. Attachments 1, 2, 3, 4 and 5 that are
provided are basically suitable for diabetics as they are only used for
treatment of areas rather than specific points. Attachments 6 and 7 are,
however, less suitable for diabetics. Always use with extreme care. If in
doubt, ask your doctor.
This instrument must be used only for the purpose for which it has been
developed, and in the manner described in the instructions for use. Any
improper use can be dangerous.
In case of prolonged intensive use (e.g. milling of dead skin from your
feet) the device might get very hot. In order to prevent skin burns in these
situations, there should be longer breaks between each application. For
your own safety, constantly monitor heat build up in the device. This par-
ticularly applies to people who are insensitive to heat.

Table of Contents

Related product manuals