24
8. Accessories and replacement parts
Replacement parts and wearing parts are available from the corresponding
service address (according to the service address list). Please state the cor-
responding order number.
Designation Item number and/or order number
Sapphire disk, fine
Sapphire disk, coarse
Sapphire cone
Felt cone
Sapphire callus rasp
Cylindrical milling cutter
Flame milling cutter
Protective cap for nail dust
574.09
9. Disposal
For environmental reasons, do not dispose of the device in the household
waste at the end of its useful life. Dispose of the device at ap-
propriate collection points in your country. Dispose of the de-
vice in accordance with the EC Directive on Waste Electrical
and Electronic Equipment (WEEE). If you have any questions,
please contact the local authorities responsible for waste dispo-
sal.
10. Technical specifications
Supply
Input:
Output:
100-240 V~; 50/60 Hz 0.5 A
30.0 V 0.25 A; 7.5 W
Average active efficiency:
≥ 80.3%
No-load power consumption:
≤ 0.09 W
Speed: 2,500 ±20% / 4,600 ±15%
Device dimensions: 15.2 x 3.7x 3.7 cm
Weight:
Mains part: approx. 93 g
Device: approx. 100 g
Subject to technical changes
To Next Page
Loading...
