Beurer MP 52 - Accessories and Replacement Parts; Cleaning and Maintenance

26
6. CLEANING AND MAINTENANCE
 WARNING
Risk of electric shock
Unplug the device each time before cleaning. Clean the device
using only the method specified. Never immerse the device or
the USB-C charging cable with mains adapter in water or other
liquids.
• Do not use any chemical or abrasive cleaning agents.
• Clean the device with a slightly damp cloth. If it is very dirty, you can
also moisten the cloth with a mild soapy solution.
• For hygienic reasons, the attachments can be cleaned with a cloth
moistened with alcohol.
7. ACCESSORIES AND REPLACEMENT
PARTS
To purchase accessories and replacement parts, please visit www.beur-
er.com or contact the service address for your country (see the service
address list). Accessories and replacement parts are also available from
retailers.
Designation Item number and/or
ordernumber
Attachment set
(includes the following
attachments)
1 sapphire wheel, fine
1 sapphire cone, fine
1 sapphire cone, coarse
1 felt cone
10 single-use attachments made
from sandpaper
1 flame-shape cutter
1 sapphire cutter, round
572.17