What to do if Beurer Personal Care Products device is on but no steam?
If your Beurer personal care product is switched on but not producing steam, or producing very little, ensure there is water in the water heater tank. Also, verify that there is liquid in the aromatherapy container. Check that the suction tube and other components are properly attached. Finally, inspect the nozzle for any blockages and clean it if necessary.
What to do if Beurer SI 40 produces no steam?
If your Beurer Kitchen Appliance is on but not producing steam, ensure that the water heater tank and aroma container have enough liquid. Also, verify that the suction tube and other components are correctly attached. Finally, inspect the nozzle for any blockages and clean it if necessary.
Indicates a risk of injury or damage to health.
Safety note indicating possible damage to the device or accessory.
Covers safe use by children, avoiding burns, flammable gases, and proper handling of packaging and cables.
Addresses risks of water submersion, impact, wet hands, cable damage, and opening the device.
Details precautions regarding power cuts, extension cables, heat, dusty areas, and vents.
Defines suitability for people, purpose, and prohibits commercial or clinical use.
Step-by-step guide for unboxing, preparing, and assembling the device for use.
Steps for connecting to power and turning the device on.
Solutions for problems like the device not working or producing insufficient steam.
Details the 3-year warranty, coverage scope, and applicable law.
General| AC input voltage | 220 - 240 V |
|---|---|
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Easy to use | Yes |
| Certification | CE |
| Product color | Translucent, White |
| Product design | Tabletop |
| Built-in display | No |
| Maximum fill volume | 60 ml |
| Nebulizer technology | Mesh nebuliser |
Weight and Dimensions| Depth | 260 mm |
|---|---|
| Width | 265 mm |
| Height | 96 mm |
| Weight | 620 g |
To Next Page