To Next PageTo Next Page
Need help?Do you have a question about the Beurer SL 60 and is the answer not in the manual?
General| Material | Polyester |
|---|---|
| Product type | Anti-snoring mask |
| Product color | Black |
| Manual | No |
| Sustainability certificates | CE |
Explains how the snore mask detects snoring and uses vibrations to improve breathing and reduce snoring.
Lists app features like snoring analysis, diary, evaluation, and sensitivity settings.
Lists system requirements for the app (iOS, Android, Bluetooth versions).
Warning notice indicating a risk of injury or damage to health.
Safety note indicating possible damage to the device/accessory.
Note on important information.
Indicates disposal according to WEEE directive.
Warning about the control unit being splash-proof and keeping it away from water.
Advice on protecting the snore mask from environmental factors.
Warning about keeping the product away from children due to choking hazard.
Warning about heat sources and proximity to microwave devices.
Specifies safe operating and storage temperatures for the snore mask.
Instructions for cleaning the control unit with isopropyl alcohol, avoiding harsh chemicals.
Identifies the control unit of the snore mask.
Identifies the micro USB connection port.
Identifies the ON/OFF switch for the device.
Identifies the button for Bluetooth connectivity.
Describes the operating light and its color meanings (Green/Red).
Identifies the display indicating Bluetooth status.
Instructions on connecting the snore mask to the "beurer SleepQuiet" app.
Steps on how to wear the snore mask correctly for optimal comfort and detection.
Guidance on what to do if the mask doesn't turn on or shows a red light (charge battery).
Step-by-step instructions for charging the device's battery.
How to check the battery status using the Bluetooth button or the app.
Information on the expected battery life after a full charge.
Instructions for transferring recorded snoring data to the companion app.
Instructions on how to remove the control unit for cleaning.
Warning to remove the control unit before cleaning to prevent damage.
Warning that the control unit is not waterproof and contact with liquids will cause damage.
Warning against chemical cleaning, wringing, tumble drying, mangling, or ironing the snore mask.
Details on how to machine wash the snore mask (pillow case, gentle cycle, 30°C).
Recommendations for eco-friendly washing and detergent use.
Note that washing negatively affects the mask; recommend washing a maximum of 10 times.
Crucial instruction to ensure the mask is completely dry before reattaching the control unit.
Provides the physical dimensions of the control unit and the mask.
States the weight of the snore mask.
Details the type of connection used (Micro USB).
Specifies the voltage and current requirements for the power supply.
Lists the battery capacity, nominal voltage, and type.
Indicates the approximate battery life based on usage.
Specifies the memory capacity for storing snoring data.
Lists the materials used for the control unit and the mask.
Identifies the technology used for data transfer (Bluetooth low energy).
Defines the temperature, humidity, and pressure for safe operation.
Specifies temperature, humidity, and pressure limits for transport and storage.
Indicates the radio frequency band used by the device.
States the transmission power level of the device.
Instructions on how to contact support and what to include for a warranty claim.
Specifies the warranty period and proof of purchase requirements.
Details conditions under which the warranty is voided (e.g., improper treatment, tampering).
States that liability for consequential losses caused by the unit is excluded.
