User Manual for MMR Refrigerators Beverage-Air
Rev. 07/20Beverage-Air10
SLIDING GLASS DOORS
1
Adjusting Spring Tension on ClearCool®3000 & ClearCool®3100
The amount of tension used on the self-closing bottle slider doors can be decreased or increased by relocating the spring
retaining grommet and self-drilling screw.
1. Hold door in open position to expose spring, grommet and screw in the header. Open only as far as required to keep
the amount of tension to a minimum.
2. Look into Header and note the 3 square cut outs.
1. Inner location is for minimum tension.
2. Mid location is for mid-range tension.
3. Outside location is for maximum tension.
To Next Page
Loading...
Need help?
General
