PD30EM & PD40EM Installation and User manual 15
ENG
Technical data
Power supply: 8 - 40 Vdc, 8 - 30 Vac.
Power consumption: 100 mA.
Interface: Connects to Bewator Entro (via dropbox)
Housing Stainless steel.
Colour: Stainless.
Environment: Indoors in general ( sales floor, shops, res-
taurants, manufacturing and assembly areas,
entrance and storage rooms).
Temperature range: 0°C to +50 °C.
Dimension (HxWxD) mm: PD30EM: 245 x 64 x 47.
PD40EM: 255 x 70 x 54.
Using the ProxCodoor
When presenting a valid tag (card) a click is heard, a green LED lights
and the handle can be used to open the door. If the handle is not used
within 4 seconds the PD30EM will be locked again which prevents the
door from being unintentionally being unlocked.
In the Bewator Entro the security level Unlocked can also be set,
where a time schedule may be used to control when door can be opened
(without using any tag). A green LED is lit as long as the PD30EM is
unlocked.