BEXT PJ 250 - Front and Rear Panel Controls

8
FRONT AND REAR PANEL CONTROLS
A. FRONT PANEL
1. Fuse 6.3 amps 220 Vac or 15 amps 120Vac
2. On/Off A.C. power switch
3. A.C. Blown Fuse Indicator
4. A.C. Power Indicator
5. Multimeter
6. Multimeter Switch
7. D.C. Fuse 20 amps
8. D.C. Blown Fuse Indicator
9. Temperature Alarm Indicator Lamp
10. Excessive Drive Alarm
11. VSWR Alarm Indicator
12. Remote Disable Indicator
B. REAR PANEL
1. RF output connector Type "N"
2. RF input connector Type "N"
3. Accessory AC plug for exciter (max 3 amps)
4. Remote protection connector Type "BNC", ground to activate
5. Remote protection connector Type "BNC". ground to activate
6. Telemetry Connections
7. Air Duct
8. A.C. Line Input