3
PRELIMINARY INSTRUCTIONS AND
WARRANTY INFORMATION
1. Please observe all safety precautions when handling this unit. This equipment contains
dangerous currents and voltages.
2. This manual is written as a general guide for those having previous knowledge and
experience with this kind of equipment. It is not intended to contain a complete statement
of all safety precautions which should be observed by personnel in using this or other
electronic equipment.
3. BEXT Inc. does not assume responsibility for injury or damage resulting from improper
procedures or practices of untrained/unqualified personnel in the handling of this unit.
4. Please observe all local codes and fire protection standards in the operation of this unit.
5. CAUTION: Always disconnect power before opening covers or removing any part of this
unit. Use appropriate grounding procedures to short out capacitors and high voltage
points before servicing.
6. Any damage to the goods must be reported to the carrier in writing on the shipment
receipt. Any discrepancy/damage discovered subsequent to delivery shall be reported to
BEXT Inc. within five days of receipt.
7. BEXT Inc. extends to the original end-user purchaser all original manufacturer’s
warranties which are transferable and all claims are to be made directly to BEXT Inc. per
indicated procedures.
8. All manufacturer’s warranties will be supported by BEXT Inc. to ensure precise and
speedy service where possible.
9. BEXT Inc. shall not be liable for damages of any nature arising out of or in connection
with the product or its use thereof.
10. BEXT’s warranty shall not include:
10.1 Reshipment of the unit to BEXT for repair purposes.
10.2 Any unauthorized repairs/modifications.
10.3 Incidental/consequential damages as a result of any defect.
10.4 Nominal non-incidental defects.
10.5 Reshipment costs or insurance of the unit or replacement units/parts.
11. Warranty shall commence on the invoice date and for the period of the manufacturer’s
warranty.
To Next Page
Loading...