Need help?Do you have a question about the Beyerdynamic M 160 and is the answer not in the manual?
Transducer and Operating Principle| transducer type | Dynamic |
|---|---|
| operating principle | Pressure gradient |
Frequency and Polar Pattern| frequency response | 40 - 18, 000 Hz |
|---|---|
| polar pattern | Hypercardioid |
| rear attenuation at 1 kHz | > 25 dB at 110° |
Electrical Specifications| open circuit voltage at 1 kHz | 1.0 mV/Pa = -60 dBV |
|---|---|
| nominal impedance | 200 Ω |
| load impedance | ≥ 1000 Ω |
Physical Characteristics| diaphragm | Pure aluminium |
|---|---|
| case/finish | Brass |
| connection | 3-pin XLR |
Dimensions and Weight| length | 156 mm |
|---|---|
| shaft diameter | 23 mm |
| head diameter | 38 mm |
| weight without cable | 156 g |
Defines the product's proper usage and limits liability for misuse.
States the company's liability for damage due to improper use.
Lists all items included in the product packaging.
Highlights the key characteristics and benefits of the microphone.
Describes the recommended uses and scenarios for the microphone.
Details how to connect the microphone using a 3-pin XLR connector.
Explains how to position and operate the microphone correctly for optimal performance.
Provides instructions for cleaning the microphone shaft and grille.
Explains how to dispose of electrical and electronic devices properly.
Offers guidance for technical problems and service contacts.
Directs users to the website for additional details and sound samples.
Details the limited warranty offered on the beyerdynamic product.
Provides information on product conformity found on the website.
To Next Page
