Need help?Do you have a question about the Beyerdynamic MIX 10 NG2 and is the answer not in the manual?
General| Channels | 10 |
|---|---|
| Type | Analog |
| Sampling Rate | 48 kHz |
| Bit Depth | 24-bit |
| Microphone Inputs | 4 |
| Line Inputs | 6 |
| Phantom Power | Yes |
| Effects | Reverb, Delay, Chorus, Flanger |
| USB Audio Interface | Yes |
| Headphone Output | 1 |
| Main Outputs | 2 |
| Monitor Outputs | 2 |
Covers general precautions, liability exemption, location, fire hazard, humidity, ventilation, and connection safety guidelines.
Guidelines for cleaning, avoiding solvents, and referring servicing to qualified personnel. Includes troubleshooting and electrical safety.
Information on EMC requirements and maximum cable lengths for compliance.
Description of front panel controls including volume, EQ, mute, and LEDs for signal, peak, and protection status.
Details on rear panel connections for inputs, outputs, power, RS 232, and dip switches, including indicator LEDs.
Details on balanced microphone inputs, gain, phantom power, and priority switching functionality.
Configuration of unbalanced stereo line inputs (CD, Tape, Tuner, Aux) and a stereo mix input for external sources.
Description of Record Out and both balanced/unbalanced Master Outputs with their characteristics.
Details on the balanced Sub Group Output and the mains power connection.
Instructions for installing the software and connecting the MIX 10 NG2 via RS 232 cable.
Details on operating the control panel, preferences, COM settings, and managing presets.
Technical details of the RS 232 interface, including data format, commands, and check sum calculations.
Detailed specifications for microphone, line, mix, main, sub, and record outputs, including impedance and levels.
Equalisation ranges (Bass/Treble) and general performance metrics like frequency response, distortion, and SNR.
Covers PC connection, operating temperature, mains voltage, power consumption, dimensions, and weight.
Visual representation of the MIX 10 NG2's internal signal flow and component connections.
Manufacturer's declaration of conformity with relevant EU directives and safety standards.
To Next Page
