MIX 10 NG2 – Important Safety Instructions
20
1. Version
MIX 10 NG2 10-channel-stereo-mixing-system, 220 - 240 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 721.077
The MIX 10 NG2 10-channel-stereo-mixing-system provides 6 microphone inputs and 4 switchable line inputs with a common master control
as well as an additional sub group output. The microphone inputs can be selected as voice-controlled priority input. The selected microphone
inputs fade in while any other source is gently faded out.
The MIX 10 NG2 can be operated via a standard serial RS 232 interface and the supplied software. The MIX 10 NG2 provides a separate
treble/bass control and mute switch per microphone input. All signals can be routed via Dip switches on the rear to the master output or the
sub group output. The sub group output can be controlled by the software as well.
Each line input provides a separate volume control on the rear.
2. Important Safety Instructions
ON: Denotes the product is turned on.
OFF: Denote the product is turned off.
WARNING
Describes precautions that should be observed to prevent the possibility of death or injury to the user.
CAUTION
Describes precautions that should be observed to prevent damage to the product.
Thank you for selecting the MIX 10 NG2 10-channel-stereo-mixing-system. Please take some time to read carefully through this manual
before setting up the equipment.
This symbol, wherever used, alerts you to the presence of un-insulated and dangerous voltages within the product enclosure.
These are voltages that may be sufficient to constitute the risk of electric shock or death.
This symbol, wherever used, alerts you to important operating and maintenance instructions.
Please read the manual.
Protective Ground Terminal
AC mains (Alternating Current)
Hazardous Live Terminal
To Next Page
Loading...
