To Next PageTo Next PageWhat to do if the signal is distorted on my Beyerdynamic Headphone?
If the signal from your Beyerdynamic Headphone is distorted, ensure that the adapter and audio cables are properly connected. If the issue persists, consider returning the cables for repair.
Why does my Beyerdynamic Headphone have distorted sound?
If the sound from your Beyerdynamic Headphone is distorted, it might be due to empty batteries. Try recharging or replacing them. Alternatively, the volume of the audio source could be too high; in that case, reduce the volume.
General| Driver | Dynamic |
|---|---|
| Connectivity | Wired |
| Type | Closed |
| Impedance | 32 Ω |
| Connector | 3.5 mm |
Identifies and explains the various controls and indicators on the transmitter unit.
Step-by-step guide for setting up and using the transmitter, covering location and mains connection.
Identifies and explains the various controls and indicators on the headphone unit.
Guide on inserting/replacing batteries and adjusting volume and reception.
Instructions for charging the rechargeable batteries for the headphone.
Guidance on cleaning the transmitter and headphone, and replacing ear pads.
Advice on optimizing wireless reception and minimizing interference.
Common problems and their solutions for the wireless headphone system.
Detailed technical data for the transmitter and headphone components.
Information on the proper disposal of electrical and electronic equipment.
