13/20
Conference cascade connection
The connection is intended for connecting two beyerdynamic SPACE MAX devices in
conference cascade mode. For this, two speaker phones are connected via the jack
socket with a beyerdynamic cascading cable (to be ordered). Pairing with the output
device is done via one of the two speakerphones connected with the cable.
Multi-point operation
The product can be paired to multiple Bluetooth
®
-enabled devices.
In normal mode, up to 8 devices can be paired.
In business mode, only 1 device can be paired.
Active connections are possible with up to two devices at a time. However, playback
of music and phone operation is only possible with one device at a time. Phone operation
has priority over playback of music; i.e. playback of music is interrupted during phone
calls.
Priority li when using the playback devices (PD):
Prio. Profile Playback devices (PD)
1 HFP (phone operation) PD 1 (device used fir)
2 HFP (phone operation) PD 2 (device used second)
3 A2DP (playback of music) PD 1 (device used fir)
4 A2DP (playback of music) PD 2 (device used second)
Setting up multi point:
1. Connect the product to the fir unit
(see “Connecting to a device via Bluetooth® (pairing)” on page 12).
2. Deactivate the Bluetooth® connection on the fir device.
3. Connect the product to the second unit (see “Connecting to a device via Bluetooth®
(pairing)” on page 12).
4. Re-activate the Bluetooth® connection to the fir device that automatically connects
to the product.
Once both devices are paired with the product, the product automatically connects
with both devices each time it is powered up.
Using multi point:
9 You have connected the product to two devices and have ju activated media play-
back.
► Briefly press the button once to accept an incoming call.
9 You have connected the product to two devices and and have ju hung up a call.
► Briefly press the button once to a the media playback that was la played.
English
To Next Page
Loading...
