Beyerdynamic Xelento wireless - Page 11

english
Xelento wireless – In-Ear Headphones
11
english
Xelento wireless – In-Ear Headphones
11
If you want to remove the
Comply™ foam eaips, firmly
press them together and pull
them from the housing with a
slight rotating movement.
Inseing and wearing
Xelento wireless
Due to the anatomical shape of the
earphone housing, the cable of the
Xelento wireless is guided behind
the ear when inseing Xelento
wireless. See adjacent drawing.
This method of wearing the ear-
phones suppresses cable noise
eectively and even when the cable
is pulled the earphones sit firmly in
the ear.
Please make sure that the cable is
conducted upward.
Only in this way is it possible to wear
the earphones correctly and com-
foably.
The right-hand earphone housing
and cable end each have a small
raised dot to mark the right-hand
side.