Beyerdynamic Xelento wireless - Page 17

english
Xelento wireless – In-Ear Headphones
17
Setting up multi-point
• Pair the Xelento wireless with the fir device (refer to
“pairing with the player”).
• Deactivate the Bluetooth
®
connection on the fir device.
• Switch the Xelento wireless o.
• Press the button  for 6 seconds to a pairing mode
(LED  flashes slowly alternating blue and red).
• Pair the Xelento wireless with the second device (refer to
“pairing with the player”).
• Re-activate the bluetooth connection to the fir device
that automatically connects to the Xelento wireless.
• Once both devices are paired with the Xelento wireless,
the Xelento wireless automatically connects with both
devices each time it is powered up.
Using multi-point
If you have paired the Xelento wireless with two devices
– and have ju activated media playback, briefly press
the multifunction button  once to answer an incoming
call.
– and have ju hung up on a phone call, briefly press the
multifunction button  once to a playing the media
which was played mo recently.