EasyManua.ls Logo

Bezzera BZ09 - Troubleshooting Guide - Part 2; Coffee Dispensing Volume and Quality; Coffee Temperature and Deposits

Bezzera BZ09
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
MOD. BEZZERA BZ09
Problem Diagnostics/solution Advice
The coffee dispenses too
abundantly
The coffee dispenses too quick-
ly and the cream is clearer than
usual.
Possible causes:
1-The grind of the coffee is too
coarse.
2-The coffee into the filter
holder is not pressed enough.
3-The dose into the filter holder
is excessive.
In cases 1-2-3, it is necessary
to adjust the grinder correctly.
The coffee is too cold Possible causes:
1-The filter holders are cold.
2-The coffee grind is too fine.
3-The water circuit of the ma-
chine is dirty (milestone).
In case 1,keep the filter holder
mounted on the group.
In case 2 change the coffee
grind.
In cases 3 call a skilled techni-
cian.
Coffee deposit on the cup
bottom
Possible causes:
1-The coffee grind is too fine.
2-The filter holder is dirty
inside, or the filter is damaged.
3-The grinder mills are worn.
In case 1, it is necessary to
adjust the grinder correctly.
In case 2, clean the filter holder
or replace the filter.
In case 3 the technician’s inter-
vention is required.

Table of Contents

Related product manuals