PROGRAMMING COFFEE QUANTITIES AND CLOCK
1. TO PROGRAM THE QUANTITY OF COFFEE PRESS BUTTON 5 “P” FOR
LONGER THAN 5 SECONDS. BUTTON 5 STARTS FLASHING. AT THE SAME
TIME BUTTONS 1 – 2 – 3 – 4 – 6 GO OFF. THE DISPLAY SHOWS:
2. START PROGRAMMING COFFEE QUANTITY STARTING FROM BUTTON 1 .
PRESS THE BUTTON TO START DISPENSING COFFEE. PRESS THE BUTTON
AGAIN TO STOP DISPENSING WHEN THE DESIRED QUANTITY HAS BEEN
DISPENSED.
NB: WILE COFFEE IS BEING DISPENSED THE SELECTED BUTTON REMAINS ON.
REPEAT THE SAME PROCEDURE WITH BUTTONS 2 - 3 - 4 - 5
3. TO SET THE CLOCK PRESS BUTTON 5 “P” FOR LONGER THAN 10 SECONDS
UNTIL THE DISPLAY SHOWS THE MESSAGE BELOW. PRESS BUTTONS 1 AND
2 TO SET THE TIME. PRESS BUTTON 3 TO SET THE MINUTES, DAY OF THE
WEEK AND SELF- START, IF AVAILABLE (SELF-START IS AN OPTIONAL
FEATURE).
Pag.1
To Next Page
Loading...
