BFC Lira - LIRA Control Unit Technician Programming; Basic System & Language Configuration

TECHNICIAN LEVEL PROGRAMMING
1. TO SET THE MACHINE IN “OFF FUNCTION” KEEP BUTTON 5 “P” PRESSED
WHILE PRESSING BUTTON 3. THE DISPLAY SHOWS THE MESSAGE BELOW.
2. WHEN IN “OFF” FUNCTION PRESS BUTTON “P” FOR 10 SECONDS UNTIL THE
DISPLAY SHOWS “ Language“. PRESS BUTTONS 1 ( NEXT ) AND 2 ( PREV.)
TO SELECT THE DESIRED LANGUAGE.
3. PRESS BUTTON 5 “P” AGAIN TO MOVE ON TO THE NEXT SETUP. THE
DISPLAY SHOWS “ Name “ . PRESS BUTTONS 1 ( NEXT ) AND 2 ( BACK ) TO
SELECT THE LETTERS. PRESS BUTTON 3 TO CONFIRM.
4. PRESS BUTTON 5 “P” AGAIN TO MOVE ON TO THE NEXT SETUP. THE
DISPLAY SHOWS “ Service Phone “ . PRESS BUTTONS 1 ( NEXT ) AND 2 (
BACK ) TO SELECT THE DIGITS . PRESS BUTTON 3 TO CONFIRM .
Pag.1
10 sec.