BFT DEIMOS BT KIT UL - Wiring Instructions: Motor Direction; Checking Motor Direction

CHECKING MOTOR DIRECTION:
The operator can be installed on the left side or on the right side of the drive way (depending on the sliding
gate). In order to have right direction of movement of the gate, proceed with following steps:
Turn power off and disengage the operator.•
Put the gate halfway open.•
Re-engage the operator and turn power on.•
Give a START command (a momentary jumper of terminals 21 – 22) or program a remote (see page 12 for •
details).
If the gate is closing:
Turn the power off.•
Reverse the connection of the motor and the limit switches:•
swap terminals 1 and 2
swap terminals 6 and 7
If the gate is opening:
No further steps are required and the operator is ready to be programmed.
WIRING INSTRUCTIONS
10 Technical Support: 1-877-995-8155
BLUE (-)
RED (+)
BLACK (COM)
RED (SWC)
BROWN (SWO)
RED (+)
BLUE (-)
BLACK (COM)
BROWN (SWC)
RED (SWO)