BFT ELBA User Manual

QUADRO DI COMANDO
CONTROL UNIT
UNITÉ DE COMMANDE
STEUERZENTRALE
CENTRAL DE MANDO
CENTRAL DO MANDO
D811585_03 22/07/09
I
GB
F
D
E
P
ELBA
ISTRUZIONI D’USO E DI INSTALLAZIONE
INSTALLATION AND USER’S MANUAL
INSTRUCTIONS D’UTILISATION ET D’INSTALLATION
INSTALLATIONS-UND GEBRAUCHSANLEITUNG
INSTRUCCIONES DE USO Y DE INSTALACION
INSTRUÇÕES DE USO E DE INSTALAÇÃO
Via Lago di Vico 44
36015 Schio (VI) - Italy
Tel. +39 0445 69 65 11
Fax. +39 0445 69 65 22
www.bft.it
e-mail: info@bft.it
8
0 2 7 9 0 8 3 2 1 7 2 5

BFT ELBA Specifications

General

Brand	BFT
Model	ELBA
Category	Control Unit
Language	English

Summary

General Outline

General Safety

Technical Specifications

Wiring and Terminal Descriptions

Adjusting Parameters and Operating Logic

Adjusting Operating Time and Automatic Closing Time

Configuration of operating time and automatic closing time using trimmers.

DIP Switch Configuration for Operating Logic

Detailed settings for the 12 DIP switches to control unit operating logic and features.

Zone Setting Configuration

Setting up zone numbers for devices in a centralized system using DIP switches or programmer.

Wireless Settings and Management

Transmitter Programming on Start Output

Procedure for programming transmitters to activate the start output.

Automatic Transmitter Programming

Automatic association of transmitter keys to specific functions.

Remote Transmitter Programming

Programming transmitters remotely without direct access to the control panel.

Deleting Transmitter List

Procedure for removing stored transmitters from the control panel's memory.

Fixed-Code Receiver Setting

Setting the receiver mode to fixed-code operation using DIP switch 12.

Programming Receiver Using EElink Protocol

Using the EElink protocol with accessories for receiver programming.

Centralized Connection

Statistics

Self-Diagnosis

Maintenance and Demolition