BFT GIUNO ULTRA BT A50 User Manual

D812230 00100_04 26-10-16
ISTRUZIONI DI INSTALLAZIONE INSTALLATION MANUAL INSTRUCTIONS D’INSTALLATION
MONTAGEANLEITUNG
INSTRUCCIONES DE INSTALACION INSTALLATIEVOORSCHRIFTEN
AUTOMAZIONI A PISTONE PER CANCELLI A BATTENTE
PISTON AUTOMATIONS FOR SWING GATES
AUTOMATIONS A PISTON POUR PORTAILS BATTANTS
HYDRAULISCHER DREHTORANTRIEB
AUTOMATIZACIONES A PISTON PARA PORTONES CON BATIENTE
AUTOMATISERINGSSYSTEMEN MET ZUIGER VOOR VLEUGELPOORTEN
GIUNO ULTRA BT A20 GIUNO ULTRA BT A50
Attenzione! Leggere attentamente le “Avvertenze” all’interno! Caution! Read “Warnings” inside carefully! Attention! Veuillez lire attentivement les Avertissements qui se trouvent à l’intérieur! Achtung! Bitte lesen Sie
aufmerksam die „Hinweise“ im Inneren! ¡Atención¡ Leer atentamente las “Advertencias”en el interior! Let op! Lees de “Waarschuwingen”tigre aan de binnenkant zorgvuldig!

BFT GIUNO ULTRA BT A50 Specifications

General

Brand	BFT
Model	GIUNO ULTRA BT A50
Category	Gate Opener
Language	English

Summary

Installation Manual

User Warnings

General Safety

General safety rules to avoid accidental problems during operation of the automation system.

Installer Warnings

Installer General Safety

Safety instructions for installers regarding installation and product hazards.

Wiring

Guidelines and safety precautions for electrical wiring of the automated system.

System Checking and Maintenance

Procedures for checking the automated system's components and ensuring proper functioning.

Quick Installation

Pillar Fastenings Installation Distances

Table detailing installation distances for pillar fastenings for various gate widths.

Fastening of Fittings to Pillar

Power Cable

Attaching Motor to Pillar Fastening

Detailed steps and diagrams for mounting the motor onto the pillar fastening bracket.

Correct Installation

Fastening of Fittings to Leaf

Closing Limit Device Adjustment

Procedure for adjusting the limit switch for the closing movement of the gate.

Opening Limit Device Adjustment

Procedure for adjusting the limit switch for the opening movement of the gate.

Locking Settings

Locking Open Setting

No Locking Open Setting

Locking Closed Setting

No Locking Closed Setting

Locking Open and Closed Setting

Non-locking Setting

Gate Leaf Fastening

Rod Insertion

Instructions for fully inserting the rod into the actuator, including torque limits.

Technical Specifications

General Information

Technical Specifications

Detailed specifications including power, pressure, forces, temperature range, and IP rating.

Block Application Limits

Installation Diagram

Correct Installation

Adjusting the Limit Switches

Instructions for positioning and adjusting slow-down and limit switch sensors.

Locking Setting

Main Parts of Automated System

Tips for Special Installations

Leaf Stops at Ground Level