To Next PageTo Next Page
Need help?Do you have a question about the BFT VIRGO SMART BT A and is the answer not in the manual?
General| Brand | BFT |
|---|---|
| Model | VIRGO SMART BT A |
| Category | Gate Opener |
| Language | English |
General safety instructions and precautions for product use and user behavior.
Guidelines for proper disposal of equipment and batteries according to regulations.
General safety instructions and compliance requirements for installation personnel.
Guidelines and warnings for electrical wiring and connections during installation.
Procedures for checking the automated system and performing maintenance.
Instructions for safely dismantling the automated system.
Explanation of symbols and navigation controls used in the menu.
Pre-configured settings for various operational logic parameters.
Explanation of symbols and navigation controls used in the menu.
List of diagnostic codes, their descriptions, and relevant notes for troubleshooting.
Overview of the operator's design, purpose, and general characteristics.
Detailed technical data, specifications, and performance characteristics of the operator.
Step-by-step instructions and procedures for installing the operator unit.
Instructions on how to fix the support plate and bracket for the operator.
Instructions for wiring the control unit's terminal board.
Guide for connecting motors and adjusting limit switches for proper operation.
Information and configuration for various safety devices used with the system.
Instructions on how to navigate and access the system's menus.
Menu for adjusting operational parameters like speed, force, and delays.
Procedure for automatic setup of operator parameters based on gate movement.
Steps to follow for testing the installed automation system and its safety features.
Configuration options for the operational logic and behavior of the system.
Selection of the specific motor type connected to the control board.
Setting the time delay for automatic closing of the gate.
Configuration for step-by-step or pulse operation modes of the gate.
Activation and configuration of the Deadman mode for safety during operation.
Configuration for pulse behavior during gate opening operations.
Function to assist solenoid lock release by pushing the gate before opening.
Feature for low-temperature installations, requiring autoset after activation.
Setting time lags for motor synchronization during opening and closing.
Option to configure an alternative direction for opening operations.
Settings for configuring the SAFE 1 input with various safety devices.
Settings for configuring the SAFE 2 input with various safety devices.
Configuration of AUX 0 output for various functions like radio channel or gate light.
Configuration of AUX 3 output for various functions like magnetic lock or maintenance.
Settings for managing fixed code transmitters and their acceptance.
Setting the security level for accessing programming menus and managing transmitters.
Configuration of the board's role (MASTER/SLAVE) in a BFT network.
Setting the address for the board within a BFT network connection.
Configuring inputs and outputs on an expansion board for extended functionality.
Configuration of the EXPI2 input on an expansion board for various commands.
Configuration of the EXPO1 output on an expansion board for various functions.
Configuration of the EXPO2 output on an expansion board for various functions.
Setting the pre-flashing behavior for traffic light signals.
Configuration for the red light status when the gate is closed.
Menu for managing radio transmitters, including adding keys and erasing lists.
