Do you have a question about the BFT STOPPY and is the answer not in the manual?
Configures operation mode for subsequent automatic closing.
Enables dwell time setting for automatic closing.
Sets dwell time for automatic closing (2s to 120s).
Enables Start/Close commands during dwell time.
Restricts Start/Close commands to specific inputs.
Controls pre-blinking signal on traffic lights.
Manages LED status indication when bollard is raised.
Manages LED status indication when bollard is lowered.
| Brand | BFT |
|---|---|
| Model | STOPPY |
| Category | Industrial Electrical |
| Language | English |
Loading...