BFT TIZIANO B GDA 260 S01 User Manual

ISTRUZIONI D’USO E DI INSTALLAZIONE INSTALLATION AND USER’S MANUAL INSTRUCTIONS D’UTILISATION ET D’INSTALLATION INSTALLATIONS-UND GEBRAUCHSANLEITUNG INSTRUCCIONES DE USO Y DE INSTALACION INSTALLATIEVOORSCHRIFTEN
Attenzione! Leggere attentamente le “Avvertenze” all’interno! Caution! Read “Warnings” inside carefully! Attention! Veuillez lire attentivement les Avertissements qui se trouvent à l’intérieur! Achtung! Bitte lesen Sie
aufmerksam die „Hinweise“ im Inneren! ¡Atención¡ Leer atentamente las “Advertencias”en el interior! Let op! Lees de “Waarschuwingen” aan de binnenkant zorgvuldig!
D811796 00100_05 24-05-12
AUTOMAZIONI PER PORTE BASCULANTI E SEZIONALI
AUTOMATION FOR OVERHEAD AND SECTIONAL GARAGE DOORS
AUTOMATION POUR PORTES BASCULANTES ET SECTIONALES
GARAGENTORANTRIEB FÜR SCHWING UND SEKTIONALTORE
AUTOMATIZACIONES PARA PUERTAS BASCULANTE Y SECCIONALES
AUTOMATISERINGEN VOOR KANTEL- EN SECTIEDEUREN
8
027908 394224
TIZIANO B GDA 260 S01
TIZIANO B GDA 260 S01

BFT TIZIANO B GDA 260 S01 Specifications

General

Motor Voltage	230 V
Maximum Door Width	6 m
Voltage	230 V
Safety Features	Obstacle detection
Control Type	Remote control

Summary

Quick Installation and Setup

Quick Installation

Guide for fast and simple installation of the automation system.

Tube Arrangement

Instructions for arranging electrical conduits before installation.

Photocell Installation

Wiring and connection details for photocell safety devices.

Configuration and Adjustment

Limit and Torque Adjustment

Setting of limit devices and automatic torque adjustment for obstacle detection.

Torque Autosetting

Automatic adjustment of torque sensitivity for obstacle detection.

Transmitter Management

Procedures for programming and cancelling transmitters.

Installer Safety Guidelines

General Safety

Important safety instructions for operating the automated system and preventing accidents.

Detailed Installation and Technical Information

General Outline

Overview of the TIZIANO B GDA 260 S01 system and its suitability for different door types.

Technical Specifications

Detailed technical data including power, force, speed, and protection ratings.

Actuator Installation

Step-by-step guide for physically mounting the actuator and its components.

Terminal Board Connections

Wiring diagram and explanation of terminal board connections for accessories.

DIP-Switch Selection

Configuration settings using DIP-switches for specific functions.

Button Functions

Description of the functions for UP, DOWN, and OK buttons on the control unit.

Limit Device Setting

Procedure for setting the door's open and closing end-of-travel limits.

Automation Check

Final checks for safety, operation, and electronic logic after installation.

User Safety and Warnings

User Warnings

Important safety instructions for the end-user regarding product operation.