Do I need an electrician to fit this
product?
If you are replacing a standard socket for a
Wi-Fi socket, then no. BG Wi-Fi sockets
come with comprehensive fitting instructions
that allow DIY installation. However, if in any
doubt, or where required by the law, consult
a competent person who is registered with an
electrical self-certification scheme. For new
installations a qualified electrician should be
employed.
FAQs (continued)
What depth of wall box is needed
to fit a Wi-Fi socket?
A standard 25mm wall box is required to
retrofit this product.
What are the dimensions of the
Wi-Fi socket?
We have ensured the Wi-Fi and USB features
fit into a standard size socket: 86mm (H) x
146mm (W) x 10mm (D).
Does the USB outlet provide data
as well as power?
No, the USB outlets only provide power to the
connected device.
Are these products ASTA
approved?
Yes, all of our wiring accessories and USB
sockets are ASTA approved. ASTA is a
universally recognised mark of product safety
and testing. Licence Number 1182.
What is the power input/output
when no USB device is connected?
The power input/draw and output of the
sockets when no device is connected is less
than 50mW.
To Next Page
Loading...