BGS technic 9259 User Manual

SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F 56 essartS resukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni :liaM-E diehcsmeR 79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 9259
Cordless Polishing Machine
IMPORTANT: Please read these instructions carefully.
Note the safe operational requirements, warnings, and cautions.
Use this product correctly, and with care for the purpose for which it is intended.
Failure to do so may cause damage and / or personal injury and will invalidate the warranty.
1. INTRODUCTION
This powerful and compact cordless polishing machine is made for polishing of small surfaces. This
well-balanced tool has a speed setting and comes with battery and charger.
2. SPECIFICATION
No-Load Speed: approx. 1500 - 3000 rpm (stepless adjustable)
Pad diameter: 100 mm
Machine weight: approx. 820 g
Noise level:
LpA: 71 dB(A) / KpA: 3 dB
LwA: 82 dB(A) / KwA: 3 dB
Vibration:
ah= 2.68 m/s²
K= 1.5 m/s²
Battery pack: 10,8 V Li-ion / 1.3Ah
Mains charger: Input: 100 - 240 VAC / 50 – 60 Hz / 30 W
Shaft thread: M10

BGS technic 9259 Specifications

General

Brand	BGS technic
Model	9259
Category	Sander
Language	English

Summary

Introduction

Specification

Safety Instructions

General Safety

Covers general safety rules, personal protection, and work area conditions for safe operation.

Battery Safety Instructions

Provides specific warnings and guidelines for handling and charging the nickel-cadmium battery pack.

Mains Power Electrical Safety

Battery Charger Safety Instructions

Operating Instructions

Parts Description

Identifies and describes the main components of the cordless polishing machine and charger.

Charging the Battery Pack

Step-by-step guide on how to properly charge the battery pack using the provided charger.

Using Polishing Machine

Instructions on attaching accessories, inserting the battery, and operating the polishing machine.

Maintenance

Disposal