BGW 250 - Page 8

·.
CHASSIS:
A
heavy steel chassis forms a protective cage for unmatched
mechanical strength. A 3/16" aluminum rack mount panel is
supplied. All modules are bolted to the chassis. The power
supply is mounted close to the front panel to allow rack
mounting without the use of guide rails or supports.
CONNECTORS:
Output- standard 3/4" spacing, 5 way binding posts for outputs
(color coded for easy identification).
Input- 1/4" phone jack
AC line- three wire grounded male connector on 5 ft. min.
cable.
MODULES:
3 plug in modules contain 95% of the circuitry. Modules
consist of 2 heat sink channel assemblies and 1 crow bar
trigger circuit board.
CIRCUIT BOARDS:
Flame retardant glass epoxy boards per mil spec.
DIMENSIONS:
Panel 19" W x 5~ H x 11 3/4" D- brushed satin aluminum.
Notching is standard Western Electric.
WEIGHT:
27 pounds net
35 pounds packaged
shipping container; unique double boxed system using
8 toro pads (trade mark of Hardigg Corp.) between inner
and outer cartons for shock protection in transit.